Вы здесь
Electrical equipment:
| Voltage, V | 12 |
| Battery | 6 CT-75 A1 or 6 CT-77 (but 1 PCs.) |
| Generator | G-287, AC, with built-in rectifier |
| Starter | ST-230-A1 or 8802.3708 |
| Wiring system | Single-wire, power supplies and consumers negative terminals are connected to the vehicle bodywork |
Steering:
| Steering gear type | Screw-ball nut. Ratio — 23.09 (middle position) |
| Power steering | Hydraulic |
Transmission:
| Clutch | Single disc, dry, friction, damping torsional vibrations in the driven disc. Clutch - hydraulic |
| Gearbox | Manual, 5-speed, all-silent , all-synchromesh (except I speed and reverse) |
| Transfer case | Mechanical, with direct and low gears. Low gear ratio — 1.982 |
| Drive axles | Main gear-bevel, hypoid |
| Gear ratio-6.83 (GAZ-3308). Cam type differential. Axle swivels have a constant velocity joints. |
Gear ratios on gears:
| gear ratios | I gear - 6,55 |
| II gear - 3,933 | |
| III gear - 2,376 | |
| IV gear - 1,442 | |
| V gear - 1,000 | |
| Reverse - 5,735 |
Optional equipment*:
| Power take-offs (com) * | Mechanical. Two gears - line reeling and unreeling |
| Towing winch * | towing, single-drum, horizontal. Gear type-worm, globoidal modified gear with the lower worm and automatic brake. Gear ratio - 24. Cable length - 50 m. Winch- PTO drive shaft. Maximum cable pull 29.4 kN (3000 kgf) when fully wound(top row coiling) and 39-44 kN (kgf 4000-4500) — when fully unwound (bottom row coiling) |
Notes:
* Depends on configuration
Base chassis:
| Base chassis | Gaz-3308 (petrol) |
| Drive wheel configuration | 4х4 |
| Vehicle type | Truck with two driven axles |
Vehicle general data:
| Vehicle curb weight (without additional equipment), kg * | 3710 |
| Vehicle load capacity (kg) * | 2000 |
| Overall weight of the vehicle with the superstructure, kg | 5950 |
| Base, mm | 3770 |
| Front track, mm | 1820 |
| Wheelbase, mm | 1770 |
| Ground clearance, mm | 315 |
| Vehicle turning radius, m | 11 |
| Maximum speed with full load, without trailer, kph | 90-95 |
| Angle of approach (full load)° | Front-48 Rear-32 |
| Maximum climbing angle with total vehicle weight,°, at least | 31 |
| Fordable depth, not more than, m | 1 |
| Loading height, mm | 1360 |
| Overall dimensions, mm* | 6 250 х 2 340 х 2 780 |
Engine and its system:
| Model | ZMZ-5231 |
| Type | Petrol, 4-stroke, liquid-cooled, carburator |
| Number and arrangement of cylinders | 8, V-shaped |
| Firing order | 1-5-4-2-6-3-7-8 |
| Cranked axle rotation direction | Right |
| Cylinder diameter and stroke, mm | 92x88 |
| Operating capacity, l | 4.67 |
| Compression ratio | 6.7 |
| Rated power, kW (hp), at least | 83 (112.8) |
| Maximum torque, n * m (kgf *m): | -at cranked axle speed 2200-2250 min-1 290 (29.5) |
| Crankshaft lowest adjustable no-toad speed, min-1 | 600 |
| Ventilation system | Closed |
| Carburetor | K-135G, double-barrel, balanced, down-draught |
| Carburetor governor | Pneumatic and centrifugal |
| Combustible mixture heating | Liquid |
| Fuel filters: | - fuel strainer Gravity fed with slotted filter element -fine filter Nonseparable paper filter |
| Air filter | Dry, replaceable paper filter with adjustable air supply |
| Lubrication system | Combined, pressure and spray |
| Oil cooler | Part-flow, switchable |
| Oil filter | Full-flow, with replaceable filter element |
| Cooling system | liquid, closed, forced circulation coolant , with an expansion tank |