Вы здесь
Power system:
Fuel tanks capacity, l * | 300 + 60 |
Electrical equipment:
Electrical system | Single-wire, with nominal voltage 24V |
Battery | 2 pcs., each with a capacity of 190 Ah |
Generator | AC, power 1000 W, works with the non-contact voltage regulator |
Starter | Electromagnetic startup, with the maximum power of 8,2 kW |
Clutch:
Type | Friction, dry, single-disc, diaphragm, with diaphragm pull-out spring |
Drive | hydraulic with an air booster |
Transmission:
Model * | YAMZ-2361 |
Type * | Five-speed gearbox, two-speed transfer case with blocked interaxable differential |
Control | manual, remote |
Transfer case :
Model type * | Ural, 2-speed with interaxable differential |
Top gear | 1,21 |
Low gear | 2,15 |
Suspension:
Front axle | On two half-elliptic springs with hydraulic telescopic shock absorbers |
Rear truck | Balancing with torque rods |
Optional equipment*:
- Front electric hoist |
- Hoist with power take-off; |
- Power take-off to drive superstructures. |
Notes:
* Depends on configuration
Base chassis:
Base chassis | Ural 4320-60, long wheelbase |
Drive wheel configuration | 6х6 |
Weight and load:
Chassis curb weight, kg * | 9 640 |
- front axle load, kg * | 4 900 |
- rear truck load, kg * | 4 740 |
Maximum load weight transported on the chassis, kg * | 10 000 |
Vehicle weight on chassis , kg | 19 975 |
- front axle load, kg | 5 240 |
- rear truck load, kg | 14 735 |
Engine:
Model |
YAMZ-65654 |
The engine YAMZ-65654 emissions correspond to Euro-4 emissions standard and the UNECE Regulations No. 96-02 | |
Type | Turbo diesel with common rail direct fuel injection |
Compression ratio | 17,5 |
Rated power, gross, kW | 169,2 |
Rated speed, min-1 | 2 100 |
Maximum torque, Nm | 883 |
Fuel injection system | common rail with high-pressure fuel rail feeding and electronic control |
Electronic engine control system | microprocessor, M240 |
Operating capacity, l | 10,85 |
Cylinder diameter and stroke, mm | 120/120 |
Compression ratio | 16,5 |
Vehicle specifications
Maximum speed, at least, kph | 80 |
Ground clearance, mm | 360 |
Outer turning radius, m | 14 |