Вы здесь
Power system:
| Fuel tanks capacity, l * | 300 |
Electrical equipment:
| Electrical system | Single-wire, with nominal voltage 24V |
| Battery | 2 pcs., each with a capacity of 190 Ah |
| Generator | AC, power 1000 W, works with the non-contact voltage regulator |
| Starter | Electromagnetic startup, with the maximum power of 8,2 kW |
Clutch:
| Type | Friction, dry, single-disc, diaphragm, with diaphragm pull-out spring |
| Drive | hydraulic with an air booster |
Transmission:
| Model * | YAMZ-2361 |
| Type * | Five-speed gearbox, two-speed transfer case with blocked interaxable differential |
| Control | manual, remote |
Suspension:
| Front axle | On two half-elliptic springs with hydraulic telescopic shock absorbers |
| Rear truck | Balancing with torque rods |
Optional equipment*:
| - Front electric hoist |
| - Hoist with power take-off; |
| - Power take-off to drive superstructures. |
Notes:
* Depends on configuration
Base chassis:
| Base chassis | Ural 5557-60 |
| Drive wheel configuration | 6х6 |
| Cabin | All-metal, 6-seat, four-door, behind the engine |
Weight and load:
| Chassis curb weight, kg * | 8 335 |
| - front axle load, kg * | 4 350 |
| - rear truck load, kg * | 3 985 |
| Maximum load weight transported on the chassis, kg * | 11 780 |
| Vehicle weight on chassis , kg | 21 300 |
| - front axle load, kg | 5 300 |
| - rear truck load, kg | 16 000 |
Engine:
| Model |
YAMZ-65654 |
| The engine YAMZ-65654 emissions correspond to Euro-4 emissions standard and the UNECE Regulations No. 96-02 | |
| Type | Turbo diesel with common rail direct fuel injection |
| Compression ratio | 17,5 |
| Gross rated power, kW (hp) | 169,2 (230) |
| Rated speed, min-1 | 2 100 |
| Maximum torque nm (kgf) | 883 (90) |
| Fuel injection system | common rail with high-pressure fuel rail feeding and electronic control |
| Electronic engine control system | microprocessor, M240 |
| Operating capacity, l | 10,85 |
| Cylinder diameter and stroke, mm | 120/120 |
| Compression ratio | 16,5 |
| Maximum speed, at least, kph | 80 |
| Ground clearance, mm | 360 |
| Outer turning radius, m | 10,8 |