Вы здесь

ESTERI LK-6000A

Pumps

Горизонтальные вкладки

Specifications
Short description: 

The pump ESTERI 10-6000 (LK-6000) is a single stage centrifugal high power water pump.
It is designed for the delivery of water and foam agents aqueous solutions to the fire site.
It is fitted unto fire fighting vehicles, mainly water tenders.

The advantages of this model: 
  • Made of bronze, rather than aluminum.
  • This significantly increases the pump useful life and durability.
  • Compact arrandement.
  • This pump can be located on a normal water tender
  • Great efficiency: This pump can be mounted  the new chassis  from the old one, since its pump  useful life is significantly longer than one of the chassis

General characteristics

General characteristics: 
Rated pressure 10 atm
Suction pipe nominal diameter 150 mm
Discharge pipe nominal diameter 66 or 77 mm
Rated capacity 100 l/s
Rated suction height 3 m
Rated speed 3 700 rpm
Required engine power 160 - 180 kW
* Manufacturing according to special customer requirements. The site does not contain the entire product line. Send us an application for a proposal
Make a request
Equipment
Short description: 

The pump ESTERI 10-6000 (LK-6000) is a single stage centrifugal high power water pump.
It is designed for the delivery of water and foam agents aqueous solutions to the fire site.
It is fitted unto fire fighting vehicles, mainly water tenders.

Equipment: 

- Fire pump ESTERI 10-6000

Description
The advantages of this model: 
  • Made of bronze, rather than aluminum.
  • This significantly increases the pump useful life and durability.
  • Compact arrandement.
  • This pump can be located on a normal water tender
  • Great efficiency: This pump can be mounted  the new chassis  from the old one, since its pump  useful life is significantly longer than one of the chassis
Description: 

The main feature of the pump is small dimensions, which allow it to be mounted on a conventional water tender.
The pump ESTERI LK-6000A can be used to increase the pressure in the hose line, for example, be delivering water from two water tenders or pumping units.
In this case, LK-600A adds approximately 10 atm. to the inlet pressure with a capacity of 100 l/s. Maximum outlet pressure for 10-6000 (LK-6000 and)-17 atm.
The parts pump are manufactured without aluminium.
The shaft is made of stainless steel, the body and the impeller are made of corrosion-resistant  cannon bronze.
This pump is characterized by high reliability in operation and does not require maintenance.
The pump is equipped with the speeder.
The direction of the rotation of the pump impeller can be changed on request, you can also choose reverse gear ratio.
The range varies from 1/1.17 to 1/2.45.
The pump is capable of letting in stones and solid particles with a diameter up to 12 mm.

 

Request a call