Вы здесь

NCPN-70/100 m

Pumps

Горизонтальные вкладки

Specifications
Short description: 

Normal pressure pump NCPN-70/100M is intended for the delivery of water supply and foam agent aqueous solution,  from a basin, a tank or a hydrant to extinguish large fires.
The pump is used for equipping main firefighting vehicles, as well as for fire boats, motor pumps and other fire fighting units used for fire extinguishing agents delivery.

The advantages of this model: 
  • The pump ensures the operation of highly efficient  nozzles and foam generators or a large number of nozzles working simultaneously.
  • The pump provides stable delivery at a wide range of delivery heads:
  • in the range from 0 to 110l/s rated delivery head is 100 ÷ 115 m.
  • The pump is characterized by high efficiency:
  • in the range from 70 l/s to 110 l/s its efficiency is 70- 80%.
  • The pump is equipped with a high power foam mixer which ensures a pumping capacity of up to 100 l/s when delivering foam agent of 6% concentration which corresponds to 16 generators GPS-600 working siimultaneously.
  • The  improved design of the dispenser allows smooth (continuously variable) dosing level control in the range from 0 to 10% and is not prone to jaming due to crystallization of foam agent residues on the inner surfaces.
  • The dispenser is controlled with a handle with built-in reducer, thanks to which little effort is required.
  • Vacuum system ensures water filling at a geometric  suction height  up to 8 m   through the suction line with double nominal width (2xDn 125 mm), the required time does not exceed 35 s .
  • The self-contained electric vacuum pump ensures its exploitation simplicity and ¨dry vacuum" test can be made without starting the engine
  • the vacuum pump is automatically shut off once the water filling process is over (additionally there is a manual control mode).
  • The pump shaft seal (gland) is made of modern sealing materials that provide greater efficiency and little friction, resistant to high temperature and mechanical stress, and do not require ongoing maintanence.
  • Operating units and other main pump components are manufactured by leading European producers, which ensures high quality and reliability of the product.

General characteristics

General characteristics: 
Rated pumping capacity (3.5 m suction height ) 70 l/s
Rated delivery head, at lest 100 m
Rated speed 2000 rmp
Input at rated pumping capacity and delivery head of 100 l/s, not more than 185 lps
Maximum pumping capacity with foam agent of 6% concentration at 100 m delivery head, at least 100 l/s
Pump dimensions (length x width x height), not more than 100 х 84 х 106 mm
Pump weight fully equipped (dry), no more than 350 kg
* Manufacturing according to special customer requirements. The site does not contain the entire product line. Send us an application for a proposal
Make a request
Equipment
Short description: 

Normal pressure pump NCPN-70/100M is intended for the delivery of water supply and foam agent aqueous solution,  from a basin, a tank or a hydrant to extinguish large fires.
The pump is used for equipping main firefighting vehicles, as well as for fire boats, motor pumps and other fire fighting units used for fire extinguishing agents delivery.

Equipment: 

The pump NCPN-70/10OM is delivered as a fully functional  assembIing unit, composed of the following elements:

  • Centrifugal pump;
  • The vacuum water filling system consisting of two   slide gate motor pumps "AVS¨, a vacuum shutter with lines and a remote control due to which it can be controlled both automatically and manually;
  • Foam agent delivery and dispensing system;
  • Discharge header with three disc slide valves(reducers), Dn 100 mm:
  • 2 lateral and one central (the model NCPN-70/100 M2; in the model NCPN-70/100M1 there is no central one);
  • Suction pipe 150 mm Dn enables 3-way water delivery;
  • Instrumentation:
  • 2 pressure-and-vacuum gauges (inlet and outlet), electronic digital tachometer,with  a time meter.

Request a call