Вы здесь

ACL-6,0-18 on chassis Ural 4320

Turntable Ladders (AL)

Горизонтальные вкладки

Specifications
Short description: 

A turntable ladder ACL-6,0-50/18 is mounted on an all-wheeled vehicle chasssis Ural 4320-60 with single-tire wheels and 6х6 drive wheel configuration.
It is designed for fire extinguishing in the settlements and manufacturing facilities.
The ACL-6,0-50/18 can be used as an independent vehicle as well as a pump unit during the pumping with one or several water tankers.

The advantages of this model: 
  • The bodywork compartment lighting is individual: when a door of a compartment is opened, the compartment lighting is turned on.
  • The ACL is equipped with front fog-lights and spotlights in the front and the rear parts of the vehicle.
  • The front spotlight control is performed from the cabin
  • The tank fixation to the chassis frame is based on elastic damping elements that decrease the tank stress caused by the frame torsion.
  • The bodywork and the cabin steps, bottom steps and bottom covering plates are made of fluted material that prevents the personnel from sliding.
  • Rear bodywork wheel arches are equipped with protection elements (side panels and splash guards).
  • In order to increase the corrosion resistance of the areas prone to  abrasive wear (bottom of the tank, inner surface of the side panels,  wheel niches of the rear bodywork), there is an additional antigravelly coating of those surfaces.
  • The fire ladder is composed of three telescopic sections and is made of carbon steel.
  • The ladder can rotate to the right as well as to the left on 360 degrees.
  • The vertical angle range of the ladder can vary from - 7 to + 75 degrees  in respect to the horizon.

General characteristics

Basic characteristics

Wheel formula: 
6х6
Chassis brand: 
Ural
Water tank, l: 
6000
Combat crew, people: 
3
General characteristics: 
Fire extinguisher OP 4 АВСЕ 1
Fire extinguisher OP 8 АВСЕ 1
Fire extinguisher OU 5 -АВСЕ 1
Nozzle RSK-50 U GOST 9923 4
Nozzle RSK-70 U GOST 9923 2
Piercing nozzle 2
Manual-control monitor LS-S20 1
Air foam nozzle ORT-50 2
Air foam nozzle ORT-70 2
Stretch line with 50 m reel 1
Fire rescue line VPS-30 1
Fire rescue line VPS-50 1
Ladder LSH GOST 53275-2009 1
Abseil fire escape system 1
Rescue hose 1
* Manufacturing according to special customer requirements. The site does not contain the entire product line. Send us an application for a proposal
Make a request
Equipment
Short description: 

A turntable ladder ACL-6,0-50/18 is mounted on an all-wheeled vehicle chasssis Ural 4320-60 with single-tire wheels and 6х6 drive wheel configuration.
It is designed for fire extinguishing in the settlements and manufacturing facilities.
The ACL-6,0-50/18 can be used as an independent vehicle as well as a pump unit during the pumping with one or several water tankers.

Notes on equipment: 

1- Breathing apparatus with compressed air and a  rescue device
2- Backup сylinder (in a protective cover)
3- Insinuating kit (gloves, overshoes, scissors, mat 750 x 750, bag)
4- Heat-reflecting suit TOK-200
5- Insulating self-rescuer SPI-20
6- Apparatus set for rescuer location detection "Rescuer Beacon Set"
7- Special speaking device SGU-120
8- Mobile radio Motorola
9- Portable radio Motorola
10- Backup battery for portable radios with charger. Motorola
11- Telephone with  GSM digital mobile system photo and video transmission
12- Water tank VS 125 SUN 125 GOST R 53249-2009
13- Foam generator GPS-600 in GOST R 50409-92
14- Coupling head GP-70x50-1,6 PM U1 GOST R 53279-2009
15- Coupling head GP-70x50-1,6 PM U1 GOST R 53279-2009
16- Coupling head GP-70x50-1,6 PM U1 GOST R 53279-2009
17- Hydrant wrench
18- Polymer ose Ramp HR3
19- Fire extinguisher OP-4 ABCDE GOST R 51057-2001
20- Fire extinguisher OP-8 ABCDE GOST R 51057-2001
21- Fire extinguisher OU-5 ABCDE GOST R 51057-2001
22- Wye RT-70  GOST R 50400-92
23- Wye RT-80 GOST R 50400-92
24- Latex delivery hose RPM (V) -50- -1.6 U1 GOST R  51049-2008, with tied heads  g-50-1, 6 PM U1 GOST R 53279-2009 L = 20 m
25- Latex delivery hose with tied outlets RPM (V) -70- -1.6 У1 GOST R 51049-2008, with tied heads  g-70-1, 6 PM U1 GOST R  53279-2009 L = 20 m
26- Latex delivery hose RPM (V) -80- -1.6 U1 GOST R  51049-2008, with tied heads  GR- 80-1, 6 PM U1 GOST R 53279-2009 L = 4 m
27- Latex delivery hose  RPM (V) -80- -1.6 U1 GOST R 51049-2008, with tied heads g-80-1, 6 PM U1 GOST R53279-2009 L = 20 m
28- Suction pressure hose V 2-75-10 GOST 5398-76, with connections g-80 UHL PT GOST r 53279-2009, L = 4 m with hose tape
29- Piercing nozzle for peat-bog fire extinguishing TS-1
30- Air foam nozzle ORT-50-GOST 9923
31- Air foam nozzle ORT70 nasadkom from GOST 9923
32- Fire rescue line VPS-30, of length 30 m in a case GOST R 53266-2009
33- Fire rescue line VPS-50, of length 50 m in a case GOST R 53266-2009
34- Abseil fire escape system "Swing"
35- Rescue hose with attachment point
36- All-metal hook  BPM GOST 16714-71
37- Multifunctional emergency rescue tool
38- Forging hammer, 5 kg. GOST 11401-75
39- Sharp-pointed spade LKO-4-930 GOST 19596-87
40- Hacksaw  GOST 26215-84 m
41- Axe A2 GOST 18578-89
42- Hook axe TPSH-1 GOST r 50982-2009
43- Seat belts cutter
44- Hydraulic pump station with a motor drive
45- Hydraulic single plunger ram
46- Membrane dry suit to ensure the safety of the rescuer in cold water
47- Portable electric generator with protective cutout device, 6 kW capacity
48- Portable reel with 40 m power cable
49- Electric  branch box with three directions
50- Electric Lamp with charger FOS 3-5/6 P
51- First Aid Kit according to  the order of the Ministry of Health of the Russian Federation No. 325 of 20.08.1996 (amended order of the MoH No. 697н from 08.11.2009)
52- Protective covers for sharp edges, "Zaschita" (Sprut) set
53- Breakdown triangle GOST R 41.27-2001
54- Tools and accessories as per chassis manufacturer's schedule
55- Canister for fuel (aluminium) 20 l

Equipment: 
Breathing apparatus 1 2
Backup cylinder 2 2
Insinuating kit 3 1
Fire proximity suit 4 3
Heat resistant suit 3
Insulating self-rescuer 5 3
Apparatus set for rescuer location detection "Rescuer Beacon Set" 6 1
Navigation system with a map of Russia 1
Signal loudspeaker unit-120 7 1
Mobile radio station 8 1
Portable radio station 9 2
Backup battery 10 2
Phone with GSM 11 1
Electric megaphone 1
Telematic module GLONAS 1
Water collector VS 125 VS 125 12 1
Foam generator GPS 600 U 13 2
Coupling head GP 50 x 70, 1-6 14 3
Coupling head GP-50 x 80 mm 1, 6 15 3
Coupling head GP-1 70x80-1, 6 16 3
Hose hold-up ZR 4
Clamp ZR-80 4
Key 80 GOST 14286-69 2
Key 150 GOST 14286-69 2
Hydrant KP-80 GOST R 53250-2009 1
Hydrant operator tool kit 1
Hydrant wrench 17 1
Hose ramp 18 2
Fire extinguisher OP 4 АВСЕ 19 1
Fire extinguisher OP 8 АВСЕ 20 1
Fire extinguisher OU 5 -АВСЕ 21 1
Wye the RT-70 U 22 2
Wye RT-80 U 23 2
Attack hose 24 6
Attack hose 25 4
Attack hose 26 2
Attack hose 27 8
Hose KSch -1-32-3 with 4 m length. with GM-50 1
Suction pressure hose 28 2
Nozzle RSK-50 U GOST 9923 4
Nozzle RSK-70 U GOST 9923 2
Piercing nozzle 29 2
Manual-control monitor LS-S20 1
Air foam nozzle ORT-50 30 2
Air foam nozzle ORT-70 31 2
Stretch line with 50 m reel 1
Fire rescue line VPS-30 32 1
Fire rescue line VPS-50 33 1
Ladder LSH GOST 53275-2009 1
Abseil fire escape system 34 1
Rescue hose 35 1
All-metal hook 36 1
Emergency rescue tool 37 1
Hook KP 1
Forging hammer, 5 kg. 38 1
Light pry bar LPL GOST 16714-71 1
Heavy pry bar LPT GOST 16714-71 1
Universal pry bar LPU GOST 16714-71 1
Round-pointed spade LKO-4-930 39 1
Square-faced shovel GOST 19596-87 1
Hacksaw 40 1
Axe A2 41 1
Hook axe TPSH-1 42 1
Knife (cutter) 43 1
Pumping station 44 1
Hydraulic cutter 1
Hydraulic jack 45 1
Hydraulic spreader 1
Double-row hose reel 1
Accessory set 1
Life vest 2
Life circle 1
Membrane dry suit 46 1
Electric generator 47 1
Portable reel with 40 m power cable 48 2
Electric branch box 49 1
Electric torch 50 2
First aid kit 51 1
Woolen blanket in a package 1,5 2
Towing line 1
Portable anemometer 1
Protective covers for sharp edges, "Zaschita" (Sprut) set 52 1
Breakdown triangle 53 1
Tools and accessories 54 1
Canister for water (plastic) 5l 1
Canister for fuel with a capacity of 20 litres 55 1
Fuel canister with 20-litre capacity 1
Vehicle blocking chock 2
Bag for documents 1
Outrigger plates 4
Firefighting equipment list 1
Description
The advantages of this model: 
  • The bodywork compartment lighting is individual: when a door of a compartment is opened, the compartment lighting is turned on.
  • The ACL is equipped with front fog-lights and spotlights in the front and the rear parts of the vehicle.
  • The front spotlight control is performed from the cabin
  • The tank fixation to the chassis frame is based on elastic damping elements that decrease the tank stress caused by the frame torsion.
  • The bodywork and the cabin steps, bottom steps and bottom covering plates are made of fluted material that prevents the personnel from sliding.
  • Rear bodywork wheel arches are equipped with protection elements (side panels and splash guards).
  • In order to increase the corrosion resistance of the areas prone to  abrasive wear (bottom of the tank, inner surface of the side panels,  wheel niches of the rear bodywork), there is an additional antigravelly coating of those surfaces.
  • The fire ladder is composed of three telescopic sections and is made of carbon steel.
  • The ladder can rotate to the right as well as to the left on 360 degrees.
  • The vertical angle range of the ladder can vary from - 7 to + 75 degrees  in respect to the horizon.
Description: 

A turntable ladder ACL is used for:

  • delivery of 3 crew members, firefighting equipment and emergency rescue tools to the fire site;
  • emergency rescue works at up to 18-meter  height with fire-extinguishing agents, firefighting equipment and  emergency rescue tools supplied with the vehicle as well as other  auxiliary procedures;
  • delivery of water from the tank, an open pond or a hydrant through a monitor and nozzles to the fire site;
  • delivery of air foam taken from a foam tank, a reservoir or an external container to the fire site.

The ACL-6,0-50/18 superstructure bodywork consists of a water tank, a foaming agent tank and side compartments designed for the firefighting equipment arrangement.
The firefighting equipment compartments are featured with a frame welded structure made of steel profiles covered with 2-mm structural steel plates.
There is a pump unit with a JOHSTADT NP 3000 fire pump in the rear compartment
The tank is made of structural steel and has a capacity of 6000 liters.
The foam tank, the piping and fittings of the foam suction and delivery system are made of corrosion-proof (stainless) steel.
The foam tank capacity is 400 l.

Request a call