Вы здесь

APT 5.3-40 on chassis Ural 55571

Горизонтальные вкладки

Specifications
Short description: 

A foam tender APT-5,3-40 on an off-road chassis Ural 55571 with 6х6 drive wheel configuration is designed for delivery of the firefighting crew, firefighting equipment and foaming agent to the fire site; delivery of the water to the fire site from an open pond or a hydrant; air foam delivery to the fire site from a foam tank or an exterior container.

The advantages of this model: 
  • One of the main advantages of APT-5,3 is its reasonable superstructure configuration and ergonomic compartments for firefighting equipment that ensure optimal arrangement of a large quantity of different firefighting equipment on a standard chassis area.
  • It is guaranteed with a non-standard foaming agent tank structure.
  • The firefighting equipment fixation as per Multimount system ensures reasonable arrangement of the firefighting equipment in the compartments as well as its safety during the transportation.
  • Thanks to the modular technology «UNIMOD» used for firefighting vehicle design an excellent ergonomics and optimal weight distribution have been achieved.
  • The space of the APT-5,3-40 top is also efficiently used.
  • Here are two foam aerial apparatus based on a standard three-section ladder and two telescopic foam masts with controllable foam generators compactly and ergonomically arranged.
  • The upper firefighting equipment is secured with a single-module fixation system.
  • Foam generator control system based on special cables allows to vary the direction of the foam jet horizontally independent of the actual height of the foam mast.  
  • The vehicle is equipped with a portable monitor for remote foam delivery to the areas difficult to access.
  • Such a wide range of the operation tools allows the firefighting crew to choose and use the most efficient fire-extinguishing technique in each particular situation.
  • The air foam blocks efficiently the oxygen access forming an insulating blanket and preventing the fire spread.
  • Unlike the water, the foam does not drain off; as a result, the fire-extinguishing agent flow rate is significantly decreased and the fire liquidation process becomes more efficient and rapid.

General characteristics

Basic characteristics

Wheel formula: 
6х6
Chassis brand: 
Ural
Combat crew, people: 
6
General characteristics: 
Attack hose RPM(V)-50-1,6- I-UHL 10
Attack hose RMP (V) -70 -1.6 I-UHL 6
Attack hose RPM(V)-80-1,6- I-UHL 12
Attack hose RPM(V)-80-1,6- I-UHL 2
Hose KU-1-32-3 (DN-32) 1
Hose V-1-125 GOST 5398-76 4
Attack suction hose V 2-75-10 2
Nozzle ORT-50 4
Nozzle ORT-50A 4
Air-foam nozzle SVPE-4 2
Manual-control monitor LS-P40U 1
Equipment
Short description: 

A foam tender APT-5,3-40 on an off-road chassis Ural 55571 with 6х6 drive wheel configuration is designed for delivery of the firefighting crew, firefighting equipment and foaming agent to the fire site; delivery of the water to the fire site from an open pond or a hydrant; air foam delivery to the fire site from a foam tank or an exterior container.

Notes on equipment: 

1- Insinuating kit (scissors, gloves, boots, mat)
2- Wear - and cold resistant attack hose  RPM(V)-50-1,6- I-UHL  GOST R 51049-2008, with connection fittings, C-50-1,6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1,6 MPa)
3- Wear - and cold resistant attack hose    RPM(V)-70-1,6- I-UHL  GOST R 51049-2008(L-20m; operating pressure - 1,6 MPa)
4- Wear resistant attack hose  cold resistant performance  RPM(V)-80-1,6- I-UHL of GOST R 51049-2008, with connection fittings, C-50-1,6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1,6 MPa)
5- Wear resistant attack hose  cold resistant performance  RPM(V)-50-1,6- I-UHL of GOST R 51049-2008, with connection fittings, GR-80-1,6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1.6 MPa)
6- Hose KSH 1-32-3 (DN-32) with the GM-50 connections for foaming agent from the external reservoir (L-m) GOST R 53279-2009
7- Suction hose 1-125 GOST 5398-76, with connections GRV-125 UHL PT GOST  R 53279-2009 L = 4 m with a hose tape
8- Attack suction Hose  V 2-75-10 GOST 5398-76, with connections GR-80 UHL PT GOST R 53279-2009, L = 4 m with a hose tape
9- Shut-off nozzle ORT-50 with adjustable flow rate not less than 2.7 l/s, the length of the compact jet - at least 30 m. With foam nozzle
10- Shut-off nozzle ORT-50 with adjustable flow rate not less than 2.7 l/s, the length of the compact jet - at least 32 m. With foam nozzle
11- Shut-off nozzle ORT-50 with adjustable flow rate not less than 2.7 l/s, the length of the compact jet - at least 32 m. With foam nozzle
12- Fire rescue line VPS30 GOST R  53266-2009,  30 m long in a case
13- Fire rescue line VPS50 GOST R  53266-2009,  50 m long in a case
14- Strainer SV-125 GOST R 53253-2009 with a caproic rope with a diameter of 11 mm, of 12 meters length
15- Sharp-pointed spade LKO-4-930 GOST 19596-87
16- Electric torch  FOS-3 with charger
17- First Aid Kit according to  the order of the Ministry of Health of the Russian Federation No. 325 of 20.08.1996 (amended order of the MoH No. 697н from 08.11.2009)
18- Tools and accessories as per chassis manufacturer's schedule

Equipment: 
Insinuating kit 1 1
Protective googles 2
Special intercom 1
Special loud speaker unit 1
Water collector VS-125 GOST R 53249-2009 2
Suction fitting G-600 GOST R 50398-92 1
GP-70x50-1,6 PM U1 GOST R 53279-2009 3
GP-80x50-1,6 PM U1 GOST R 53279-2009 3
GP-80х70-1,6 PM U1 GOST R 53279-2009 3
Hose hold-up 4
Clamp ZR-80 4
Key 80 GOST 14286-69 2
Key 125 GOST 14286-69 2
Hydrant wrench 1
Fire extinguisher OP-5 GOST R 51057-2001 1
Fire extinguisher OP-10 GOST R 51057-2001 2
Fire extinguisher OU-5 GOST R 51057-2001 1
Wye RT 70 GOST R 50400-92 2
Wye RT 80 GOST R 50400-92 2
Hose ramp 2
Attack hose RPM(V)-50-1,6- I-UHL 2 10
Attack hose RMP (V) -70 -1.6 I-UHL 3 6
Attack hose RPM(V)-80-1,6- I-UHL 4 12
Attack hose RPM(V)-80-1,6- I-UHL 5 2
Hose KSch-1-32-3 (DN-32) 6 1
Hose V-1-125 GOST 5398-76 7 4
Attack suction hose V 2-75-10 8 2
Nozzle ORT-50 9 4
Nozzle ORT-50A 10 4
Air-foam nozzle SVPE-4 2
Manual-control monitor LS-S40U 11 1
Rescue line VPS 30 12 1
Fire rescue line VPS 50 13 1
Strainer SV-125 14 2
Ladder L-3K GOST 53275-2009 1
Ladder PL GOST 53275-2009 1
Ladder LSH GOST 53275-2009 1
All-metal hook BPM   1
Pitchfork 1
Hook KP GOST 16714-71 1
Forging hammer of 5 kg weight 1
Light pry bar LPL GOST 16714-71 1
Heavy pry bar LPT GOST 16714-71 1
Pry bar with ball head GOST 16714-71 1
Universal pry bar LPU GOST 16714-71 1
Round-pointed spade LKO-4-930 15 1
Square-faced shovel GOST 19596-87 1
Hacksaw 1-500-4 GOST 26215-84 1
Knife (cutter) for safety belts 1
Axe T-A2 GOST 18578-89 1
Electric torch FOS-3 16 4
First Aid Kit 17 1
Towing line 1
Breakdown triangle GOST R 41.27-2001 1
Tools and accessories 18 1
Canister for water of 5 liters capacity 1
Canister for fuel of 20 litres capacity 1
Vehicle blocking chock 2
Blow torch LP-1 1
Wrench set 1
Bag for documents 1
Firefighting equipment list 1
Description
The advantages of this model: 
  • One of the main advantages of APT-5,3 is its reasonable superstructure configuration and ergonomic compartments for firefighting equipment that ensure optimal arrangement of a large quantity of different firefighting equipment on a standard chassis area.
  • It is guaranteed with a non-standard foaming agent tank structure.
  • The firefighting equipment fixation as per Multimount system ensures reasonable arrangement of the firefighting equipment in the compartments as well as its safety during the transportation.
  • Thanks to the modular technology «UNIMOD» used for firefighting vehicle design an excellent ergonomics and optimal weight distribution have been achieved.
  • The space of the APT-5,3-40 top is also efficiently used.
  • Here are two foam aerial apparatus based on a standard three-section ladder and two telescopic foam masts with controllable foam generators compactly and ergonomically arranged.
  • The upper firefighting equipment is secured with a single-module fixation system.
  • Foam generator control system based on special cables allows to vary the direction of the foam jet horizontally independent of the actual height of the foam mast.  
  • The vehicle is equipped with a portable monitor for remote foam delivery to the areas difficult to access.
  • Such a wide range of the operation tools allows the firefighting crew to choose and use the most efficient fire-extinguishing technique in each particular situation.
  • The air foam blocks efficiently the oxygen access forming an insulating blanket and preventing the fire spread.
  • Unlike the water, the foam does not drain off; as a result, the fire-extinguishing agent flow rate is significantly decreased and the fire liquidation process becomes more efficient and rapid.
Description: 

A foam tender APT-5.3-40 on an off-road chassis Ural 55571 with 6х6 drive wheel configuration is designed for delivery of the firefighting crew, firefighting equipment and foaming agent to the fire site; delivery of the water to the fire site from an open pond or a hydrant;  air foam delivery to the fire site from a foam tank or an exterior container.

The main task of the APT 5.3-40 is extinguishing fires of various complexity with the help of air foam. This kind of fire extinguishing is especially efficient when it is  required to liquidate fires at oil, gas and chemicals storage and  refining facilities and other inflammable substances.

The vehicle has one common tank for fire extinguishing agents, with a capacity of 5 300 liters. The vehicle can be used as an independent unit, as well as in collaboration with other fvehicles.

 

Request a call