AC 3.2 on chassis IvecoCargo

Вы здесь

Water tenders (AC)

Request a call

Горизонтальные вкладки

Specifications

Short description:

Fire truck AC 3.2 on the basis of chassis IvecoCargo designed for firefighting and rescue. Provides for transportation of fire personnel in the amount of 2-7 people, fire extinguishing means (water, foam concentrate), fire-fighting and emergency rescue tools to the fire site.

The advantages of this model:

The cabin is designed as a single sealed construction made of aluminium profiles.
The cabin consists of two parts, and can transport the cabin crew of 6 people(including the driver).
The breathing apparatus retainers are built into the seat backs.
The bottom steps open and close automatically when opening and closing doors.
There are 4 compartments on each side for firefighting equipment and emergency rescue tools.
The pump compartment is located in the rear part of the vehicle.
The door to the pump compartment rises up and can be rigidly fixated in the upper position obliquely, acting as a protective visor.
The bodywork fixation to the vehicle frame is based on elastic damping elements that decrease the bodywork stress caused by the frame torsion.
The tank with a built-in foam tank is made of corrosion resistant aluminium reinforced fibreglass.
It has a volume of 2,5 cubic metres.
The foam tank has a capacity of 240 litres and is made of fibreglass.
A centrifugal fire pump NCPN-40/100 is located In the pump compartment of the ABR .
The siingle-modular system for compact arrangement and secure fixation of the canisters for transportation and storage suction hoses is located on the top of the fire superstructure.
The small rescue unit has a wide equipment range that includes a navigation system, a power generator with various power tools, as well as rescue hydraulic tools with a pumping station

General characteristics

Basic characteristics

Wheel formula:

4х2 - 4x4

Chassis brand:

Iveco

Water tank, l:

1000 - 5000

Combat crew, people:

2 – 7

Capacity for frother, l:

180 - 5000

General characteristics:

Wheelbase, mm	3 500 – 19 500
Length, mm	4 700 – 8 500
Height, mm	2 800 – 3 750
Width, mm	2550
Fire pump	NCPN-40/100 Variants
Fixed monitor , l/s	40 Variants

* Manufacturing according to special customer requirements. The site does not contain the entire product line. Send us an application for a proposal

Make a request

Equipment

Short description:

Notes on equipment:

1- Breathing apparatus with compressed air and a rescue device
2- Backup cylinder BK-7-300 C (in a protective case)
3- Fire Fighter Costume teplootrazhatelnogo complect talk 200 Kit
4- Control device of firemen location " Rescuer´s beacon"
5- Navigation System with a map of Russia, GPS Navigator DEXP Auriga DS500
6- Signal-speaking device SGU with flashing mode and blue flashing beacon
7- Portable radio station Motorola DM1400
8- Portable radio MotorolaDР 1400
9- Backup battery for portable radio with charger
10- Onboard navigation and communication equipment set
11- Medium-concentration foam generator, with a capacity of 600 l/s GPS 600
12- Suction fitting rated with a capacity of 600 l/min G-600
13- Coupling adapter GP 70х50 mm
14- Coupling adapter GP 80 x 50 mm
15- Coupling adapter GP 80 x 65 mm
16- Hose clamp with a diameter of 80 mm ZPR-80
17- Key K-80 mm with 80 mm diameter
18- Key K-150 mm with 150 mm diameter
19- Hydrant operator tool kit (hammer, chisel, bag clips-4, ferrules-9, marker, bag)
20- Hydrant wrench
21- Polymer hose ramp MPR-80
22- Portable pumping fire extinguisher OP-4
23- Portable pumping fire extinguisher OP-8
24- Carbon dioxide fire extinguisher OU-5
25- 3-way manifold RT-70, outlet width of 70 mm
26- Branch 3-piece traveling RT-80, pass the input pipe 80 m
27- Attack hose, Ø 51 mm (L-20 m, operating pressure-1.6 Mpa) with wire bound couplings GR-50
28- Attack hose, Ø 65 mm (L-20 m, operating pressure-1.6 Mpa) with wire bound couplings GR-70
29- Attack hose Ø 80 mm (L = 4 m, operating pressure-1.6 Mpa) with coupling head GR-80
30- Attack hose Ø 80 mm (L = 20 m, operating pressure -1.6 Mpa) with tied coupling heads GR-80
31- Acid-base hose KSch 1-50 of 4 m length, Dn 50 with coupling fittings
32- Suction hose V-1-125 of 4 m length , Dn 125
33- Suction pressure hose V-2-75-10 of 4 m length, Dn 75
34- Suction strainer SV-125, Dу 125 with a float and with a caproic rope of a diameter of 11 mm, of 12 m length
35- Shut-off nozzle RSP-50. Solid jet range 30 m, sprayed jet range 15 m. Outlet junction for GR-50
36- Shut-off nozzle. Solid jet range 32 m, sprayed jet range 18 m. Outlet junction for GR-80
37- Fixed monitor LS-P20U , foam and water, universal, portable, manual
38- Portable multi-purpose foam mixer PRO/PAK-RU, for wet foam and medium concentration foam
39- Slotted spray, operating pressure range from 0.15 to 0.5 MPa, inclusive
40- Small remotely-controlled mobile fire-extinguishing unit l MUPR type S-SP-7-NK-TV-UP-20
41- Portable induced-draft fan DPE-7 with adapter, foam generator and an attack hose of 5 m length
42- Fire rescue line VPS-30 of 30 m length in a case
43- Fire rescue line VPS-50 of 50 m length in a case
44- 3-section -ladder L-3K
45- Abseil fire escape system
46- A set of tools and equipment for rescue operations at road accidents
47- All-metal hook BPM
48- Multifunctional emergency rescue tools. Emergency rescue tool
49- Forging hammer TRUPER MD-12F» with a weight of 5 kg
50- Universal pry bar LPU
51- Seat belts cutter Martor
52- Hacksaw BISON "EXPERT"
53- Circular saw driven by internal combustion engine Husqvarna K760 (or STIHL TS 420). Included: grinding wheels for concrete – 1 pcs. discs for metal – 1 pcs.
54- Rescue unit for drowning "Aleksandrov life-line"
55- Membrane dry suit to ensure the safety of the rescuer in cold water
56- Portable generator with RCD Fubag BS 6000
57- Portable reel with cable Caliber 40 m (2 x 2.5)
58- Electric branch box in three directions
59- Electric group torch with charger FOS 3-5/6
60- Vehicle first aid kit
61- First-aid kit "FEST" for vehicles
62- Protective cape-stretcherProtective cover-stretcher "CLOAK" special fireproof TU 8599-051-38996367-2008
63- Woolen blanket in a package. GOST 9382-78 "Pure wool and half-wool blankets. General technical conditions"
64- Towing line Tplus, of 5 m length, with a load capacity of 8 t
65- Protective covers from sharp edges, set GOST 16965-71 "Protective covers. General technical conditions"
66- Tools and accessories as per chassis manufacturer's schedule
67- Tank for water with a capacity of KP-5 5 l
68- Tank for fuel with a capacity of KS-20 20 l
69- Vehicle blocking chock
70- Blow torch "SPARTA 91443»
71- Fire pump MP-10/60 "Vodolei"
72- Wrench set KROFT 210112, 12 items: 4200 mm
73- Rearview camera with a monitor in the driver cabin
74- Smoke-laden area orientation system lightning guiding line GDZS

Equipment:

Breathing apparatus ¹	5
Backup сylinder BK-7-300 S ²	4
Insinuating kit	1
Fireman costume ³	3
Heat resistant suit TASK	3
Radiation protective suit	3
Insulating self-rescuer SPI-20	3
Monitoring device location ⁴	1
Navigation system with a map of Russia ⁵	1
Signal loudspeaker unit ⁶	1
Mobile radio station ⁷	1
Portable radio station ⁸	4
Backup battery ⁹	4
Electric megaphone Techno 37-30	1
Navigation and communication equipment ¹⁰	1
Water collector VS-125	1
Medium-concentration foam generator ¹¹	2
Suction fitting ¹²	1
Coupling adapter ¹³	3
Coupling adapter ¹⁴	3
Coupling adapter ¹⁵	3
Hose hold-up ZR-80	4
Hose clamp ¹⁶	4
Key K-80 ¹⁷	2
Key K-150 ¹⁸	2
Fire hydrant KP	1
Hydrant operator tool kit ¹⁹	1
Hydrant wrench ²⁰	1
Polymer hose ramp ²¹	2
Fire extinguisher ²²	1
Fire extinguisher ²³	2
Carbon dioxide fire extinguisher²⁴	1
3-way manifold ²⁵	2
3-way manifold ²⁶	2
Attack hose ²⁷	6
Attack hoses ²⁸	4
Attack hose ²⁹	2
Attack hose ³⁰	10
Acid-base hose ³¹	1
Suction hose ³²	2
Suction pressure hose ³³	2
Suction strainer SV-125 ³⁴	1
Nozzle ³⁵	4
Nozzle ³⁶	2
Nozzle pry bar LS-50	1
Fixed monitor ³⁷	1
Foam mixer ³⁸	1
Slotted sprayer ³⁹	1
Mobile fire-extinguishing installation ⁴⁰	1
Portable induced-draft fan ⁴¹	1
Fire rescue line ⁴²	1
Fire rescue line ⁴³	1
Three-section ladder ⁴⁴	1
Step ladder LP	1
Hook ladder LSh	1
Abseil fire escape system ⁴⁵	1
Tool set ⁴⁶	1
Hook ⁴⁷	1
Hand tools ⁴⁸	1
Forging hammer "TRUPER MD-12F» ⁴⁹	1
Light pry bar	1
Heavy pry bar	1
Universal pry bar ⁵⁰	1
Ready-assembled round-pointed spade	1
Ready-assembled square-faced shovel	1
Knife (cutter) ⁵¹	1
Hacksaw ⁵²	1
Axe "Kraftool"	1
Assault axe TPSH-SP	1
Bolt cutter Matrix	1
Manual hydraulic jack 15 t	1
Circular saw ⁵³	1
Life vest	2
Life circle	1
Rescue tool ⁵⁴	1
Membrane dry suit ⁵⁵	1
Portable generator ⁵⁶	1
Portable reel ⁵⁷	2
Electric branch box ⁵⁸	1
Electric torch ⁵⁹	4
Emergency health kit ⁶⁰	1
First aid kit ⁶¹	1
Protective cape-stretcher ⁶²	1
Woolen blanket in a package ⁶³	2
Towing line Tplus	1
Protective covers from sharp edges ⁶⁴	1
Breakdown triangle⁶⁵	1
Tools and accessories ⁶⁶	1
Canister for water ⁶⁷	1
Canister for fuel ⁶⁸	1
Vehicle blocking chock ⁶⁹	2
Blow torch ⁷⁰	1
Fire pump ⁷¹	1
Wrench set ⁷²	1
Bag for documents	1
Thermal imaging Camera Flir K55	1
Rear view camera ⁷³	1
Orientation system ⁷⁴	1
Firefighting equipment list	1

Description

The advantages of this model:

The cabin is designed as a single sealed construction made of aluminium profiles.
The cabin consists of two parts, and can transport the cabin crew of 6 people(including the driver).
The breathing apparatus retainers are built into the seat backs.
The bottom steps open and close automatically when opening and closing doors.
There are 4 compartments on each side for firefighting equipment and emergency rescue tools.
The pump compartment is located in the rear part of the vehicle.
The door to the pump compartment rises up and can be rigidly fixated in the upper position obliquely, acting as a protective visor.
The bodywork fixation to the vehicle frame is based on elastic damping elements that decrease the bodywork stress caused by the frame torsion.
The tank with a built-in foam tank is made of corrosion resistant aluminium reinforced fibreglass.
It has a volume of 2,5 cubic metres.
The foam tank has a capacity of 240 litres and is made of fibreglass.
A centrifugal fire pump NCPN-40/100 is located In the pump compartment of the ABR .
The siingle-modular system for compact arrangement and secure fixation of the canisters for transportation and storage suction hoses is located on the top of the fire superstructure.
The small rescue unit has a wide equipment range that includes a navigation system, a power generator with various power tools, as well as rescue hydraulic tools with a pumping station

Description:

The cabin is a basic cabin of the chassis, salon type, 2-door, 2- seat (or with a separate cabin 4-door 7-seat).
In the doorway of the cabin and in the door openings there are handrails for convenience and rapid entrancw of the crew.
In the second row of the cabin there are 4 seats with individual backs.
In the immediate blizostimozhet host odnobalonnyj compressed air breathing apparatus.
Each seat has a separate mechanism for fixation of the respiratory apparatus, and under the seats there are places for fire-fighting equipment.
The common space for fie fighters makes team work more coordinated and rapid.
The cabin is equipped with handrails, indoor lighting, heating, a manhole on the top and specific control panels and control systems for the vehicle and its equipment.
There are fixed automatic bottom steps which allow the crew to enter the cabin easily.
The water and foam tanks are made of corrosion resistant reinforced fiberglass (carbon steel, stainless steel, polypropylene and polyethylene are also possible).
In fixing the tank to the body of present elastic damping elements, to prevent adverse effects on the tank from twisting the frame Optional possibility to install the stand-alone or stationary heating capacities, as well as their thermal insulation.
The bodywork and the cabin are an assembled structure made of aluminium profiles, lined with aluminium sheets in accordance with adhesion technology.( reinforced fibreglass sheets are also possible).
The bodywork forms a part of the fire superstructure and serves for placement and protection of firefighting equipment and emergency resue tools from damage during transportation.
Our own sandwich-panels are used for increased heat and noise insulation, as well as for increased comfort.
The bodywork consists of the compartments for firefighting equipment and emergency resue tools as well as the pump compartment in the rear part.
The bodywork fixation to the vehicle frame is based on elastic damping elements that decrease the bodywork stress caused by the frame torsion.
The compartments are equipped with roller-shutters (panel doors are also possible).
The shutters are made of aluminium alloys.
The door of the pump compartment if of roller shutter type (panel door is also possible, in this case it serves as a protective visor).
All doors are equipped with self-locks, which retain them in a closed position, also there is an open doors indication on the control panel in the driver's cabin.
Open doors, manholes, and other structural elements of the vehicle, which increase its overall dimensions, are equipped with reflective elements and other signalling devices indicating the dimensions of the vehicle when the doors are open during its stop.
Doorways, manholes and other elements of the bodywork have seals that protect against atmospheric precipitation, dust and dirt.
The firefighting equipment is located considering the tactics of its usage, which ensures the reliability of fixation, accessibility, convenience and safety during its mounting and demounting.
The firefighting equipment when located is united into groups according to its purpose(as standard):
-personal fire fighters equipment;
-equipment for water intake and first nozzle delivery;
-equipment to elevate personnel at height;
-structure cutting and demolition equipment
-equipment for laying and maintenance of the main hose lines, etc.;
- other equipment.
The firefighting equipment is securely installed and mounted in the compartments of the firefighting vehicle.
Pencil cases for suction hoses are located in the upper part at the top of the vehicle and are also made from corrosion resistant materials.
Stairs for climbing the vehicle top are made of an aluminum alloy.
There are folding bottom steps for the convenience of the crew.
The fire truck equipped with a pumping unit consisting of:
-fire pump with a vacuum system of water intake and manual foam dispensing system ( automatic foam mixing system is also possible );
-hoses with manual control valves and connections (remote control is also possible);
- control system
A fire pump NCPN-40/100 is installed in the pump compartment (fire pumps of all types with a capacity from 40 l/s to 133 l/s are possible)
Energy-efficient LED technology is used.