Вы здесь

AC-4,0 on chassis Ural 43206

Water tenders (AC)

Горизонтальные вкладки

Specifications
Short description: 

A water tender AC 4.0  on the chassis  Ural 4320-60  is designed to extinguish fires and conduct rescue operations.
Provides for transportation of fire personnel in the amount of 2-7 people, fire extinguishing means (water, foam concentrate), fire-fighting and rescue tool.

The advantages of this model: 
  • The cabin is designed as a single sealed construction made of aluminium profiles.
  • The cabin consists of two parts, and can transport the  cabin crew of 6 people(including the driver).
  • The breathing apparatus retainers are built into the seat backs.
  • The bottom steps open and close automatically when opening and closing doors.
  • There are 4 compartments on each side for firefighting equipment and emergency rescue tools.
  • The pump compartment is located in the rear part of the vehicle.
  • The door to the pump compartment rises up and can be rigidly fixated in the upper position obliquely, acting as a protective visor.
  • The bodywork fixation to the vehicle frame is based on elastic damping elements that decrease the bodywork stress caused by the frame torsion.
  • The tank with a built-in foam tank is made of corrosion resistant aluminium reinforced fibreglass.
  • It has a volume of 2,5 cubic metres.
  • The foam tank has a capacity of 240 litres and is made of fibreglass.
  • A centrifugal fire pump NCPN-40/100  is  located In the pump compartment of the ABR .
  • The siingle-modular system for compact arrangement and secure fixation of the canisters for transportation and storage suction hoses is located on the top of the fire superstructure.
  • The small rescue unit has a wide equipment range that includes a navigation system, a power generator with various power tools, as well as rescue hydraulic tools with a pumping station

General characteristics

Basic characteristics

Wheel formula: 
4х4
Chassis brand: 
Ural
Water tank, l: 
1000 - 4000
Combat crew, people: 
2 – 7
Capacity for frother, l: 
180 - 4000
General characteristics: 
Wheelbase, kg 10 500 – 14 500
Length, mm 7 700 – 8 200
Height, mm 2 800 – 3 350
Width, mm 2550

Fire pump

 

NCPN-40/100

Variants

Fire barrel, l/s

 

40

Variants

* Manufacturing according to special customer requirements. The site does not contain the entire product line. Send us an application for a proposal
Make a request
Equipment
Short description: 

A water tender AC 4.0  on the chassis  Ural 4320-60  is designed to extinguish fires and conduct rescue operations.
Provides for transportation of fire personnel in the amount of 2-7 people, fire extinguishing means (water, foam concentrate), fire-fighting and rescue tool.

Notes on equipment: 

1- Insinuating kit (scissors, gloves, boots, mat)
2- Wear - and cold resistant attack hose  RPM(V)-50-1,6- I-UHL  GOST R 51049-2008, with connection fittings, C-50-1,6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1,6 MPa)
3- Wear - and cold resistant attack hose    RPM(V)-70-1,6- I-UHL  GOST R 51049-2008(L-20m; operating pressure - 1,6 MPa)
4- Wear resistant attack hose  cold resistant performance  RPM(V)-80-1,6- I-UHL of GOST R 51049-2008, with connection fittings, C-50-1,6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1,6 MPa)
5- Wear resistant attack hose  cold resistant performance  RPM(V)-50-1,6- I-UHL of GOST R 51049-2008, with connection fittings, GR-80-1,6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1.6 MPa)
6- Hose KSH 1-32-3 (DN-32) with the GM-50 connections for foaming agent from the external reservoir (L-m) GOST R 53279-2009
7- Suction hose 1-125 GOST 5398-76, with connections GDV-125 UHL PT GOST  R 53279-2009 L = 4 m with a hose tape
8- Attack suction Hose  V 2-75-10 GOST 5398-76, with connections g-80 UHL PT GOST R 53279-2009, L = 4 m with a hose tape
9- Shut-off nozzle ORT-50 with adjustable flow rate not less than 2.7 l/s, the length of the compact jet - at least 30 m. Foam nozzle
10- Shut-off nozzle ORT-50 with adjustable flow rate not less than 2.7 l/s, the length of the compact jet - at least 32 m. Foam nozzle
11- Manual-control monitor LS-S40U, maximum flow 40 l/s, the length of the compact jet is 60 m, the wet foam possible, adjustable flow
12- Fire rescue line VPS30 GOST R  53266-2009,  30 m long in a case
13- Fire rescue line VPS50 GOST R  53266-2009,  50 m long in a case
14- Strainer SV-125 GOST R 53253-2009 with a caproic rope with a diameter of 11 mm, of 12 meters length
15- Ykovaja shovel, digging, Pinnacle qnt 4-930 GOST 19596-87
16- Electric torch  FOS-3 with charger
17- First Aid Kit according to  the order of the Ministry of Health of the Russian Federation No. 325 of 20.08.1996 (amended order of the MoH No. 697н from 08.11.2009)
18- Tools and accessories as per chassis manufacturer's schedule

Equipment: 
Insinuating kit 1 1
Protective googles 2
Special intercom 1
Special loud speaker unit 1
Water collector VS-125 GOST R 53249-2009 2
Suction fitting G-600 GOST R 50398-92 1
GP-70x50-1,6 PM U1 GOST R 53279-2009 3
GP-80x50-1,6 PM U1 GOST R 53279-2009 3
GP-80х70-1,6 PM U1 GOST R 53279-2009 3
Hose hold-up 4
Clamp ZR-80 4
Key 80 GOST 14286-69 2
Key 125 GOST 14286-69 2
Hydrant wrench 1
Fire extinguisher OP-5 GOST R 51057-2001 1
Fire extinguisher OP-10 GOST R 51057-2001 2
Fire extinguisher OU-5 GOST R 51057-2001 1
Wye RT 70 GOST R 50400-92 2
Wye RT 80 GOST R 50400-92 2
Hose ramp 2
Attack hose RMP 2 10
Attack hose cold resistant 3 6
Attack hose cold resistant 4 12
Attack hose wear-resistant 5 2
Hose KU-1-32-3 (DN-32) 6 1
Suction Hose V-1-125 GOST 5398-76 7 4
Attack suction hose V 2-75-10 8 2
Shut-off nozzle ORT-50 9 4
Shut-off nozzle ORT-50A 10 4
Air-foam nozzle SVPE-4 2
Manual-control monitor LS-P40U 11 1
Fire rescue line 12 1
Fire rescue line VPS 50 13 1
Strainer SV-125 GOST 14 2
Ladder L-3K GOST 53275-2009 1
Ladder PL GOST 53275-2009 1
Ladder LSH GOST 53275-2009 1
All-metal hook BPM GOST 16714-71 1
Pitchfork 1
Hook KP GOST 16714-71 1
Forging hammer of 5 kg weight 1
Light pry bar LPL GOST 16714-71 1
Heavy pry bar LPT GOST 16714-71 1
Pry bar with ball head GOST 16714-71 1
Universal pry bar LPU GOST 16714-71 1
Spade LKO-4-930 GOST 19596-87 15 1
Square-faced shovel GOST 19596-87 1
Hacksaw 1-500-4 GOST 26215-84 1
Knife (cutter) for safety belts 1
Axe T-A2 GOST 18578-89 1
Electric lamp with charger 16 4
First Aid Kit 17 1
Towing line 1
Breakdown triangle GOST R 41.27-2001 1
Tools and accessories 18 1
Canister for water of 5 liters capacity 1
Canister for fuel of 20 litres capacity 1
Vehicle blocking chock 2
Blow torch LP-1 1
Wrench set 1
Bag for documents 1
Firefighting equipment list 1
Description
The advantages of this model: 
  • The cabin is designed as a single sealed construction made of aluminium profiles.
  • The cabin consists of two parts, and can transport the  cabin crew of 6 people(including the driver).
  • The breathing apparatus retainers are built into the seat backs.
  • The bottom steps open and close automatically when opening and closing doors.
  • There are 4 compartments on each side for firefighting equipment and emergency rescue tools.
  • The pump compartment is located in the rear part of the vehicle.
  • The door to the pump compartment rises up and can be rigidly fixated in the upper position obliquely, acting as a protective visor.
  • The bodywork fixation to the vehicle frame is based on elastic damping elements that decrease the bodywork stress caused by the frame torsion.
  • The tank with a built-in foam tank is made of corrosion resistant aluminium reinforced fibreglass.
  • It has a volume of 2,5 cubic metres.
  • The foam tank has a capacity of 240 litres and is made of fibreglass.
  • A centrifugal fire pump NCPN-40/100  is  located In the pump compartment of the ABR .
  • The siingle-modular system for compact arrangement and secure fixation of the canisters for transportation and storage suction hoses is located on the top of the fire superstructure.
  • The small rescue unit has a wide equipment range that includes a navigation system, a power generator with various power tools, as well as rescue hydraulic tools with a pumping station
Description: 

The cabin is a basic cabin of the chassis, salon type, 2-door, 2- seat (or with a separate cabin  4-door 7-seat).
In the doorway of the cabin and in the door openings there are handrails for convenience and rapid entrancw of the crew.
In the second row of the cabin there are 4 seats with individual backs.
A breathing apparatus with compressed air can be located nearby.
Each seat has a separate mechanism for fixation of the respiratory apparatus, and under the seats there are places for fire-fighting equipment.
The common space for fie fighters makes  team work more coordinated and rapid.
The cabin is equipped with handrails, indoor lighting, heating, a manhole on the top and specific control panels and  control systems for the vehicle and its equipment.
There are fixed automatic bottom steps which allow the crew to enter the cabin easily.
The water and foam tanks are made of  corrosion resistant  reinforced fiberglass (carbon steel, stainless steel, polypropylene and polyethylene are also possible).
The bodywork fixation to the vehicle frame is based on elastic damping elements that decrease the bodywork stress caused by the frame torsion.
It is possible to use self-contained or fixed heaters for the tanks, as well as thermal insulation.
The bodywork and the cabin are an assembled structure made of aluminium profiles, lined with aluminium sheets in accordance with adhesion technology.( reinforced fibreglass sheets are also possible).
The bodywork forms a part of the fire superstructure and serves for  placement and protection of firefighting equipment and emergency resue tools from damage during transportation.
Our own sandwich-panels are used for increased heat and noise insulation, as well as for increased comfort.
The bodywork consists of the compartments for firefighting equipment and emergency resue tools as well as the pump compartment in the rear part.
The bodywork fixation to the vehicle frame is based on elastic damping elements that decrease the bodywork stress caused by the frame torsion.
The compartments are equipped with roller-shutters (panel  doors are also possible).
The shutters are made of aluminium alloys.
The door of the pump compartment if of roller shutter type (panel  door is also possible, in this case it serves as a protective visor).
All doors are equipped with self-locks, which retain them in a closed position, also there is an  open doors indication  on the control panel in the driver's cabin.
Open doors, manholes, and other structural elements of the vehicle, which increase its  overall dimensions,  are equipped with reflective elements and other signalling devices indicating the dimensions of the vehicle when the doors are open during its stop.
Doorways, manholes and other elements of the bodywork have seals that protect against  atmospheric precipitation, dust and dirt.
The firefighting equipment is located considering the tactics of its usage, which ensures the reliability of fixation, accessibility, convenience and safety during its mounting and demounting.
The firefighting equipment when located is united into  groups according to its purpose(as standard):
-personal fire fighters equipment;
-equipment for water intake and  first nozzle delivery;
-equipment to elevate personnel at height;
-structure cutting and demolition equipment
-equipment for laying and maintenance  of the main hose lines, etc.;
- other equipment.
The firefighting equipment is  securely installed and mounted in the compartments of the firefighting vehicle.
Pencil cases for suction hoses are located in the upper part at the top of the vehicle and are also made from corrosion resistant materials.
Stairs for climbing the vehicle  top  are made of an aluminum alloy.
There are folding bottom steps for the convenience of the crew.
The fire truck equipped with a pumping unit consisting of:
-fire pump with a vacuum system of water intake and manual foam dispensing system ( automatic foam mixing system is also possible );
-hoses with manual control valves and connections (remote control is also possible);
- control system
A fire pump NCPN-40/100 is installed in the pump compartment (fire pumps of all types with a capacity from 40 l/s to 133 l/s are possible)
Energy-efficient LED technology is used.
To register a detailed proposal with options please send us a request or contact our company via contact phone numbers.

NCPN-40/100 is located in the rear compartment
- feed pump, l/s (l/m) 40 (3000)
- pressure, bar 10
Fire barrel, l/s 40

Optional ability to install pumps NCPN-50/100, НЦПК-40/100-4/400, NCPN-70/100.

Optional ability to install 60 HP, 80 HP, as well as with the remote control.

Request a call