Вы здесь

/
/
/
AC 6.0-40 on chassis KAMAZ-5350

AC 6.0-40 on chassis KAMAZ-5350

Water tenders (AC)
View new models

Горизонтальные вкладки

Specifications
Short description: 

A water tender AC6.0 -40 on a chassis KAMAZ-5350 is designed for fire extinguishing and rescue works.
The vehicle is used for delivery of personnel, fire-extinguishing agents as well as firefighting equipment and emergency rescue tools to the fire site.

The advantages of this model: 
  • The water tender AC 6,0-40 on chassis KamAZ passed the necessary certification for conformity to the Technical Regulations for Fire Safety Requirements for this type of vehicles.  
  • Combined crew cabins ensure allocation of seven crew members.
  • Here are two modules connected one with another via removable fixators and double-sealing system.
  • The driver's cabin is basic (for water tenders on KamAZ chassis), the second module is a frame structure covered with steel plates.
  • Floor covering is made of corrosion resistant materials with anti-skid features.
  • The crew cabin is equipped with personal breathing protection devices and auxiliary air cylinders.
  • The air heater of  the cabin operates with the same fuel as AC 6,0-40 and ensures the  ambient temperature that is necessary for the crew's operation.
  • A water tank is made of multi-layered composite with heat-insulating foam interlayer, i.e. sandwich.
  • Its corrosion resistance is well known:
  • unlike metal that exhibits rust with time, the composite does not require any patch-up.
  • The total capacity of the water tank is 6000 liters.
  • The walls of the tank are bended.
  • Inside, there are functional partitions (wave absorbers) that decrease sloshing during the movement of the water tender.  
  • A foam tank is made of composite that is also highly resistant to corrosion in respect to foam.
  • Its capacity is 360 liters, that is about  6% of the capacity of the water tank.
  • Normal pressure pump is standard: NCPN-40/100 (FPN 10-2400).
  • It is located in the rear compartment.
  • It is located in the rear compartment.
  • The firefighting vehicle (on KamAZ 5350) is equipped with a monitor, suction hose cases and hand ladders located  on the top of the upper structure.
  • Fixation of the triple-section  ladder is equipped with various devices that simplify its removal.
  • The vehicle is equipped with metal ladders for simple access to the top of the water tender.
  • The ladders are fixed in the rear part of the bodywork in a way that does not prevent the climbing to the top no matter if the door is open or closed.
  • Modules with compartments for firefighting equipment are made of aluminum profiles covered with aluminum sheets in accordance with adhesion technologies.
  • Roller shutters of the compartments  are featured with drum-type roll-up systems.
  • The firefighting equipment  is arranged ergonomically and reliably based on principles of prompt  operation and convenience.
  • Inside the rear side compartments, there is an additional firefighting equipment door that holds part of the tools.
  • It is made of aluminum (which reduces the weight of the construction) and is located just outside the door, blinds.
  • Outside, the compartments of the  fire superstructure are featured with independent additional lighting that is necessary for the operation at night.

General characteristics

Basic characteristics

Wheel formula: 
6х6
Chassis brand: 
KamAZ
Water tank, l: 
6000
Combat crew, people: 
7
General characteristics: 
Attack hose RPM(V)-50-1,6- I-UHL 10
Attack hose RMP (V) -70 -1.6 I-UHL 6
Attack hose RPM(V)-80-1,6- I-UHL 12
Attack hose RPM(V)-80-1,6- I-UHL 2
Hose KU-1-32-3 (DN-32) 1
Hose V-1-125 GOST 5398-76 4
Attack suction hose V 2-75-10 2
Nozzle ORT-50 4
Nozzle ORT-50A 4
Air-foam nozzle SVPE-4 2
Manual-control monitor LS-P40U 1
Equipment
Short description: 

A water tender AC6.0 -40 on a chassis KAMAZ-5350 is designed for fire extinguishing and rescue works.
The vehicle is used for delivery of personnel, fire-extinguishing agents as well as firefighting equipment and emergency rescue tools to the fire site.

Notes on equipment: 

1- Insinuating kit (scissors, gloves, boots, mat)
2- Wear - and cold resistant attack hose  RPM(V)-50-1,6- I-UHL  GOST R 51049-2008, with connection fittings, GR-50-1.6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1.6 MPa)
3- Wear - and cold resistant attack hose RPM(V)-70-1.6- I-UHL  GOST R 51049-2008, with connection fittings, GR-70-1.6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1.6 MPa)
4- Wear - and cold resistant attack hose  RPM(V)-80-1.6- I-UHL  GOST R 51049-2008, with connection fittings, GR-80-1.6 PM UHL GOST R 53279-2009 (L-20m; operating pressure - 1.6 MPa)
5- Wear - and cold resistant attack hose  RPM(V)-80-1.6- I-UHL  GOST R 51049-2008, with connection fittings, GR-80-1.6 PM UHL GOST R 53279-2009 L=5m
6- Hose KSH 1-32-3 (DN-32) with with tied outlets GM-50 connections for supplying foaming agent from an external reservoir (L-4m) GOST R 53279-2009
7- Suction hose V-1-125 GOST 5398-76, with connection fittings GRV-125 UHL PM GOST  R 53279-2009 L = 4 m with a hose tape
8- Attack suction hose  V 2-75-10 GOST 5398-76, with connection fititngs GR-80 UHL PM GOST R 53279-2009, L = 4 m with a hose tape
9- Shut-off nozzle ORT-50 with adjustable flow rate, at least 2.7 l/s, the length of the compact jet - at least 30 m. With a foam nozzle
10- Shut-off nozzle ORT-50 with adjustable flow rate not less than 2.7 l/s, the length of the compact jet - at least 32 m. With a foam nozzle
11- Shut-off nozzle ORT-50 with adjustable flow rate not less than 2.7 l/s, the length of the compact jet - at least 32 m. With a foam nozzle
12- Fire rescue line VPS30 GOST R  53266-2009,  30 m long in a case
13- Fire rescue line VPS50 GOST R  53266-2009,  50 m long in a case
14- Strainer SV-125 GOST R 53253-2009 with a caproic rope with a diameter of 11 mm,  12 meters long
15- Sharp-pointed spade LKO-4-930 GOST 19596-87
16- Electric torch  FOS-3 with charger
17- First Aid Kit according to  the order of the Ministry of Health of the Russian Federation No. 325 of 20.08.1996 (amended order of the MoH No. 697н from 08.11.2009)
18- Tools and accessories as per chassis manufacturer's schedule

Equipment: 
Insinuating kit 1 1
Protective googles 2
Special intercom 1
Special loud speaker unit 1
Water collector VS-125 GOST R 53249-2009 2
Suction fitting G-600 GOST R 50398-92 1
GP-70x50-1,6 PM U1 GOST R 53279-2009 3
GP-80x50-1,6 PM U1 GOST R 53279-2009 3
GP-80х70-1,6 PM U1 GOST R 53279-2009 3
Hose hold-up 4
Clamp ZR-80 4
Key 80 GOST 14286-69 2
Key 125 GOST 14286-69 2
Hydrant wrench 1
Fire extinguisher OP-5 GOST R 51057-2001 1
Fire extinguisher OP-10 GOST R 51057-2001 2
Fire extinguisher OU-5 GOST R 51057-2001 1
Wye RT 70 GOST R 50400-92 2
Wye RT 80 GOST R 50400-92 2
Hose ramp 2
Attack hose RPM(V)-50-1,6- I-UHL 2 10
Attack hose RMP (V) -70 -1.6 I-UHL 3 6
Attack hose RPM(V)-80-1,6- I-UHL 4 12
Attack hose RPM(V)-80-1,6- I-UHL 5 2
Hose KSch-1-32-3 (DN-32) 6 1
Hose V-1-125 GOST 5398-76 7 4
Attack suction hose V 2-75-10 8 2
Nozzle ORT-50 9 4
Nozzle ORT-50A 10 4
Air-foam nozzle SVPE-4 2
Manual-control monitor LS-S40U 11 1
Rescue line VPS 30 12 1
Fire rescue line VPS 50 13 1
Strainer SV-125 14 2
Ladder L-3K GOST 53275-2009 1
Ladder PL GOST 53275-2009 1
Ladder LSH GOST 53275-2009 1
All-metal hook BPM   1
Pikes 1
Hook KP GOST 16714-71 1
Forging hammer of 5 kg weight 1
Light pry bar LPL GOST 16714-71 1
Heavy pry bar LPT GOST 16714-71 1
Pry bar with ball head GOST 16714-71 1
Universal pry bar LPU GOST 16714-71 1
Round-pointed spade LKO-4-930 15 1
Square-faced shovel GOST 19596-87 1
Hacksaw 1-500-4 GOST 26215-84 1
Knife (cutter) for safety belts 1
Axe T-A2 GOST 18578-89 1
Electric torch FOS-3 16 4
First Aid Kit 17 1
Towing line 1
Breakdown triangle GOST R 41.27-2001 1
Tools and accessories 18 1
Canister for water of 5 liters capacity 1
Canister for fuel of 20 litres capacity 1
Vehicle blocking chock 2
Blow torch LP-1 1
Wrench set 1
Bag for documents 1
Firefighting equipment list 1
Description
The advantages of this model: 
  • The water tender AC 6,0-40 on chassis KamAZ passed the necessary certification for conformity to the Technical Regulations for Fire Safety Requirements for this type of vehicles.  
  • Combined crew cabins ensure allocation of seven crew members.
  • Here are two modules connected one with another via removable fixators and double-sealing system.
  • The driver's cabin is basic (for water tenders on KamAZ chassis), the second module is a frame structure covered with steel plates.
  • Floor covering is made of corrosion resistant materials with anti-skid features.
  • The crew cabin is equipped with personal breathing protection devices and auxiliary air cylinders.
  • The air heater of  the cabin operates with the same fuel as AC 6,0-40 and ensures the  ambient temperature that is necessary for the crew's operation.
  • A water tank is made of multi-layered composite with heat-insulating foam interlayer, i.e. sandwich.
  • Its corrosion resistance is well known:
  • unlike metal that exhibits rust with time, the composite does not require any patch-up.
  • The total capacity of the water tank is 6000 liters.
  • The walls of the tank are bended.
  • Inside, there are functional partitions (wave absorbers) that decrease sloshing during the movement of the water tender.  
  • A foam tank is made of composite that is also highly resistant to corrosion in respect to foam.
  • Its capacity is 360 liters, that is about  6% of the capacity of the water tank.
  • Normal pressure pump is standard: NCPN-40/100 (FPN 10-2400).
  • It is located in the rear compartment.
  • It is located in the rear compartment.
  • The firefighting vehicle (on KamAZ 5350) is equipped with a monitor, suction hose cases and hand ladders located  on the top of the upper structure.
  • Fixation of the triple-section  ladder is equipped with various devices that simplify its removal.
  • The vehicle is equipped with metal ladders for simple access to the top of the water tender.
  • The ladders are fixed in the rear part of the bodywork in a way that does not prevent the climbing to the top no matter if the door is open or closed.
  • Modules with compartments for firefighting equipment are made of aluminum profiles covered with aluminum sheets in accordance with adhesion technologies.
  • Roller shutters of the compartments  are featured with drum-type roll-up systems.
  • The firefighting equipment  is arranged ergonomically and reliably based on principles of prompt  operation and convenience.
  • Inside the rear side compartments, there is an additional firefighting equipment door that holds part of the tools.
  • It is made of aluminum (which reduces the weight of the construction) and is located just outside the door, blinds.
  • Outside, the compartments of the  fire superstructure are featured with independent additional lighting that is necessary for the operation at night.
Description: 

A water tender AC 6.0 -40 on a chassis KAMAZ-5350 is designed for fire extinguishing and rescue works. The vehicle is used for delivery of personnel, fire-extinguishing agents as well as firefighting equipment and emergency rescue tools to the fire site.
If a fire is expanded, the water tender immediately can apply water or foam from a fixed monitor, thus preventing the spread of fire, and then can be set to the water source. The water tender has a new design with a" high " superstructure. It was produced according to advanced manufacturing technology.
The chassis KAMAZ has a new restyled cabin  designed in 2015.

Request a call